Netgear ProSafe WG302 Wireless Access Point

Provided by Shoppers Choice

MODEL- WG302NA VENDOR- NETGEAR INC. FEATURES- ProSafe 802. 11g Wireless Access Point Intelligent Networking Features for a Scalable, Secure Solution. NETGEAR s ProSafe 802. 11g Wireless Access Point sets the standard for next-generation high performance, secure, manageable, reliable wireless local area networks (WLANs). This powerful device provides the ultimate in continuous industry-standard 54 Mbps access to corporate network resources, e-mail, and the Internet for a wireless workforce. Fully compatible with IEEE 802. 11g (2. 4 GHz), it also can be set for dynamic 108 Mbps 802. 11g. In addition, it is backward compatible to preserve your 802. 11b-based investments, providing a migration path to higher performance networking. Wireless Distribution System (WDS) supplies wireless point-to-point bridging, point-to- multipoint bridging, and repeater functionality for deployment over large areas. Advanced security features include up to 152-bit Wireless Encryption Protocol (WEP) data encryption, Wi-Fi Protected Access (WPA) , 802. 1x and Virtual Private Network (VPN) pass-through support, and Medium Access Control (MAC) address filtering. NETGEAR ProSafe Wireless Access Point is rated for plenum air spaces. Static 108 Mbps 802. 11g available now. Dynamic version available via future firmware update. In order to achieve 108 Mbps, requires client adapter that supports the same mode. NETGEAR s WAG311 PCI Card, WAG511 PC Card and WG511T PC Card all support 108 Mbps 802. Future firmware upgrade. Includes Wireless Access Point, Two (2) 5 dBi Detachable Antennas, Resource CD, Power adapter, 3 m (10-ft) Ethernet cable, Wall Mounting Kit, Installation guide, Warranty/support information card. Security Complies with industry security standards for wireless data encryption, user authentication, and user authorization. Delivers state-of-the-art WLAN security with 40/64-, 128-, and 152-bit WEP data encryption. WPA provides enhanced, interoperable Wi-Fi IEEE 802. 11b wireless networking security. Includes MAC address authentication with 256-user Access Control List (ACL) and VPN pass-through. WPA and 802. 1x support enables strong mutual authentication to ensure that only legitimate clients associate with corporate RADIUS servers. Management Integrated IEEE 802. 3af-based Power over Ethernet (PoE) support eliminates extra cables and the need to locate near a power outlet, as the access point is powered over the Ethernet cable. Supports Simple Network Management Protocol (SNMP) MIB I, MIB II, and 802. 11 MIB using SNMP-based network management software, such as HP OpenView. Supports all popular 802. 1x port-based authentication protocols, including Extensible Authentication Protocol (EAP) Transport Layer Security (TLS), Protected EAP (PEAP), and Tunneled TLS (TTLS). Console port facilitates local configuration and monitoring. Users can remotely configure, update, and monitor multiple WG302 foots simultaneously via FTP. Aptitude IEEE 802. 11g wireless standard -- with optional speeds up to 108 Mbps -- takes care of business communications with great dispatch and skill. Delivers Wireless Distribution System (WDS) functionality for point-to- point and point-to-multi-point bridging and repeater modes. A fourth mode enables the WG302 to act as a bridge and access point simultaneously. Dynamic rate shifting guarantees the fastest possible connections. Auto Network Connect keeps users connected to the network even while roaming. Usability Cost effective, simple to install and use. Plenum rated - appropriate for placement above drop-down ceilings and under raised floors. Equipped with convenient Smart Wizard browser-based interface. Fitted with two external, detachable 5 dBi antennas -- obtain NETGEAR s antenna and flexible point placement accessories separately for expanded wireless capacity and range. IEEE 802. 11e-based Quality of Service (QoS) support is available via firmware upgrade. Protected with a NETGEAR 3-year warranty. -- SPECIFICATIONs ---------------------------------------WIRELESS - IEEE 802. 11g 54 Mbps Wireless Access Point Two (2) 5 dBi detachable antennas Typical maximum power output: 19. 8 dBm Typical maximum receive sensitivity: 96 dBCONNECTORs- (1) 10BaseT/100BaseTX/RJ-45 port with Auto Uplink (Auto MDIX) with IEEE 802. 3af Power over Ethernet (PoE) support. (1) console port with standard RS-232C interface with DB-9 male connector. (2) reverse SMA antenna connectorsPROCESSOR - Intel 422MEMORY - 8MB Flash, 16MB DRAMINDICATORs- LEDs: Power, Test, 100 Mbps, Link/ACT, and WLAN 802. 11gNETWORK MANAGEMENT- Remote configuration and management through Web browser, SNMP or Telnet with command line interface (CLI). SNMP management supports SNMP MIB I, MIB II, and 802. 11 MIBADVANCED WIRELESS FEATURES- Wireless Distribution System Point-to-point wireless bridge mode Point-to-multipoint wireless bridge mode Repeater mode Simultaneous wireless bridge and access point mode Adjustable output power control from 100 mW down to 0 mWSECURITY - 40/64-, 128-, and 152-bit WEP encryption Block SSID Broadcast VPN pass-through support MAC address filtering with access control lists -- up to 256 users. 802. 1x RADIUS support with EAP TLS, TTLS, PEAP Wi-Fi Protected Access (WPA) Secure SSH Telnet Secure Socket Layer (SSL) remote management login (Free basic installation support provided for 90 days from date of purchase; optional premium support available). Wireless isolation enables peer-to-peer blocking so users may not access another user s PC. REQUIRES - Configuring the Access Point: Windows 98, Me, 2000, or XP 2 Mbytes of available disk spaceAPPROVALS - IEEE 802. 11g (2. 4 GHz Frequency Band, DSSS Modulation Technique) IEEE 802. 3af Power over Ethernet (PoE) FCC Part 15 Subpart B and Subpart C CE EN60950, EN 300328-2 v1. 1. 1 (2000-07), EMC EN301489-1 v1. 2. 1 (2000-08), and EN301489-17 v1. 1. 1 (2000-09). EN55022(B), CISPR22(B), AS/NZS 3548(B) POWER- Power adapter: Output 12 VDC, 1. 2A SIZE - 7. 4 inchw x 4. 8 inch x 1. 25 inch WT. - 1. 27 lbs. Www. Netgear. Com